Quake Watch 2014

a reply to: muzzy

SC3 does not appear on this list of contributors to the ORPHEUS network (EMSC - European-Mediterranean Observatories)

Use form SC3 to request paternity leave and/or Ordinary Statutory Paternity Pay (OSPP) if you're a baby's biological father or the mother's husband or partner

SC3 - Ordinary Statutory Paternity Pay/Leave

So there you have it. Problem solved!

BUT what it actually is is this Near instantaneous estimates of earthquake magnitude - SeisComp3

a further update to my post about ESMC data

I have completed the changeover of the ProSQL and Pro versions of QVSData. I should get the standard version out later today or first thing tomorrow.

This also give the LISS helicorder access back and the other helicorders such as CERI, Canaries, Greece etc.

a reply to: angelchemuel
yes I noticed that but kept typing anyway, I can't keep all that stuff in my head, have to get it out
thanks for the tea, I only drink tea on a Saturday, at my Dads, otherwise its coffee.

a reply to: PuterMan

AhHa! good olde Seiscomp3 eh, I know it well from Geonet, they use it for their automatic estimates too, got it off GFZ.
Didn't realise they had their own seperate system, I'd seen that SC3 before on the Scientific page of EMSC.
Can be unreliable.

An update by me in response to my earlier post with regard to the QVSData Standard Program.


If you want it you can now go and get it.

qvsdata.wordpress.com...

In future you should automatically be notified of updates from within the program. Standard will tell you, and offer to download them. Pro will simply tell you to expect an email if you have not already got it.

Enjoy!

PS: If by some quirk of fate you had already downloaded and installed the update before 20:30 UTC (21:30 BST etc) because the program notified you you had beset uninstall it and do it again. There was an error in the patches that meant New Zealand got stopped! Mr Muzzy would not be pleased!

a reply to: PuterMan

Great, I downloaded the new version and can get EMSC. However the Geonet one won't load to the main page now. No problem though, I got the data for the 27thUTC through the Data Centre, and cross checked with Geonet search directly to make sure.
I sent you an e-mail about it.

originally posted by: muzzy
update on post: muzzy
Samothraki 6.3Ml (6.8Mw) Aegean Sea aftershocks map reviewed data NOA
mag1= 15
mag2= 78
mag3= 40
mag4= 10
mag5= 0
mag6= 1
total= 144
total energy released= 43,363.810 TTNT

Didn't seem many aftershocks for a 6.8, so just out of interest I thought I'd check on the Turkish earthquake site KOERI

HOLY MOLEY
KOERI data mapped
mag1= 251
mag2= 266
mag3= 92
mag4= 16
mag5= 0
mag6= 1
total= 626
total energy released= 86,512.836 TTNT
they had the main shock at 6.5ML = 84,802.43TTNT

at the same cut off point on NOA of 27/05/2014 2:42:14UTC (144 events)
KOERI had 557 events!!!!!!!

a reply to: muzzy

PS: If by some quirk of fate you had already downloaded and installed the update before 20:30 UTC (21:30 BST etc) because the program notified you you had beset uninstall it and do it again. There was an error in the patches that meant New Zealand got stopped! Mr Muzzy would not be pleased!

By me.

and

However the Geonet one won't load to the main page now

Yup sounds like you got zapped by the quirk. I emailed you. Just in case anyone else has the problem all you need to do is download again, uninstall the program and them re-install the latest, (Don't worry uninstalling does not delete your data if you use the uninstall I provide.)

M5.3 - 31km ESE of Boca de Yuma, Dominican Republic
2014-05-28 21:15:05 UTC
Event Time

2014-05-28 21:15:05 UTC
2014-05-28 17:15:05 UTC-04:00 at epicenter
2014-05-28 17:15:05 UTC-04:00 system time
Location

18.248°N 68.349°W depth=108.0km (67.1mi)

Nearby Cities

31km (19mi) ESE of Boca de Yuma, Dominican Republic
37km (23mi) S of Punta Cana, Dominican Republic
55km (34mi) SE of Salvaleon de Higuey, Dominican Republic
68km (42mi) ESE of La Romana, Dominican Republic
175km (109mi) E of Santo Domingo, Dominican Republic

EMSC has it at 5.7

a reply to: whatnext21

Refigured up to a 5.8 on the USGS page and on the EMSC page.

"Yup sounds like you got zapped by the quirk"

lol thought u said quark,,
see here
www.abovetopsecret.com...

although if on fibre op it is possible
lol

a reply to: PuterMan

a reply to: Nyiah
yep, confirmed by The Puerto Rico Seismic Network (PRSN)

Estimated Maximum Intensity: V in Western Puerto Rico region
Date: May 28, 2014 21:15:04 UTC
May 28, 2014 17:15:04 Local Time
Region: Eastern Dominican Republic
Distances: 46.32 Km West-Northwest of Mona Island,PR
60.52 Km Southeast of Higüey,DR
137.55 Km West of Mayagüez,PR
Magnitude: 5.80 Mw
Location: Latitude:18.133 Longitude:-68.351
Depth: 91 Km
Tsunami Warning Level: No Warning, Advisory or Watch is in effect for Puerto Rico and the Virgin Islands
Issued date and time : 2014-05-28 17:15:23

the PRSN was set up by the USGS in 1974 and the primary objective was to evaluate the local seismicity for the construction of the Aquirre and Islote nuclear power plants!!!???! more...
pretty risky location for nuclear power plants if you ask me

2014-05-30 08:20:17 THA.
2014-05-30 01:20:17 UTC.
Myanmar-China Border Region
Lat: 24.92 , Long: 97.63
Mag: 5.8
Source: Seismological Bureau, Thai Meterological Department
www.seismology.tmd.go.th...

confirmed by the Chinese;

2014-05-30 09:20:12.9CST
25.0, 97.8
12
Ms6.1
天然地震 云南省德宏傣族景颇族自治州盈江县
data.earthquake.cn...

Update on the Samothraki (Aegean Sea) aftershocks at 139hrs (almost 6days)
mag1= 305
mag2= 317
mag3= 107
mag4= 19
mag5= 0
mag6= 1
total= 749
still hanging out for that M5.5 yet

map

timeline graph based on KOERI data

______click image for larger version, opens in new tab/window______

This is not good

Something is warming up tonight.


3.7
42km NNE of Three Rivers, California
2014-05-30 00:49:02 UTC-07:000.1 km
4.3
21km NW of Bridgeport, California
2014-05-30 00:48:33 UTC-07:007.7 km

USGS feed

earthquake.usgs.gov...

earthquake.usgs.gov...

a reply to: dreamfox1
2nd link is now deleted, these may be the same event?

a reply to: PuterMan
Just wanted to let you know that this latest version is running smoothly.

looks quiet




a reply to: dreamfox1

Too quiet.............

www.abovetopsecret.com...

Just kidding, I don't know for sure.......