It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

This one you will love and is one that I was meaning when I mentioned to you all where those other p

page: 1
1

log in

join
share:

posted on Sep, 23 2011 @ 11:19 PM
link   
arts of my attempts of getting you to grasp some means of ways to manipulate mecanically in most part in logic constitutes being by means of rotary projections. Well he is one that uses levee and escaping the travelling and forces that in thus far this world has thought to be the needed absolutes. So here you have that instance where you were changing that flat tire on your car and if you didn't loosen those lugs before getting it of the ground; that wheel would turn right? So imagine that tire iron being very long and just cranked on to that same area that that lug was and after you crank it to an extrem without that wheel turning of courxe; you have that other end connected to the other side of the center of that wheel's axel and there is always a relief from the wheel's advancement onto that cranked tire iron and there in turn is almost no force needed to keep that tension at a regular because your levee onto it is almost non existant. And you even then should understand that the the larger your wheel; then the greater levee you export onto it because it is being pryed to turn. And if I get a rude remark on this from someone; I will be done with all of you and find another site and in a matter of time you will regret sadly of course. I don't mean to be rude but read over and over again; there has never been anything that I have read that I could not understand and nore sould anyone else if they concentrate enough.
edit on 23-9-2011 by MichelJCardin because: (no reason given)




posted on Sep, 23 2011 @ 11:50 PM
link   
reply to post by MichelJCardin
 


"there has never been anything that I have read that I could not understand..."

Then maybe you can translate this for someone that is finding it rather difficult Michael, because this so far doesn't make sense.

I am interested in hearing what you have to say however, so please try again if you will.



posted on Sep, 24 2011 @ 12:04 AM
link   
hmmm something about nothing is absolute and can be changed with a slight push after a little resistance.............i have no idea



posted on Sep, 24 2011 @ 12:06 AM
link   
reply to post by MichelJCardin
 


Michel J.
Not to sure what is going thru your mind this evening but your previous thread regarding humidity under 20000 lbs pressure contained “0” information as in NO writing. This thread of yours contains 100% verbiage and no discernable information.


And as far as threatening the entire ATS family that you will leave and will take your tire iron and go home, if someone says something rude. Well good luck just hope you can find your way home after you get that tire mounted. I really can’t stand folks who threaten to quit.

Not trying to be rude buddy



posted on Sep, 24 2011 @ 12:17 AM
link   
Maybe with a little patience and kindness we can better understand what he is trying to tell us, as it seems pretty important to him.



posted on Sep, 24 2011 @ 12:37 AM
link   
reply to post by BioSafe
 


You are partially right but the attempt was not intended to be a threat; but only to not really explain where I stand in terms of confidence of you all to realise at least a few of these that I share for the sole reason being of enlighting some people; I should apolagise for this but the actual excaimation of sorts was dirrected to this one aspect of simple physics that would likely discourage me from sharing or wasting my time; but I did not at all mean it in any way as to label you what so ever and find all that I have read to be respectful towards me and apreciate such things as I am also one to behave in such a way. I may have been harsh and am sorry and likely I am most certain that I even if I were to try; not any compairable group of individuals; I just don't follow media and propergandas like most people and it seemed to me that you all did and it may not have been my calling. Sorry.And I don't get offended when people reply with negitive ways; I simply had built an assurance that I positivally was essentially succeed at some of these amoung you all with ease in terms of my covering issues and needs of explainations because of my assuming that one would at least invision and understand and relay to the rest; Lack of this rsult is not encouraging when some of solutions that I shared were improvements apon non feasable workings on likely mostly mechanics or fuel cumbustions convertings of forces or as each of course case may mad been. Or even; why does it not be alluring in nature for one to be curious to unortidox says of another's offerings at least enough to brainstorm apon subjects which were offered?
edit on 24-9-2011 by MichelJCardin because: (no reason given)
I mean for instance that I and a tool at your disposal as for instance when you had told me that a bullet train was built; my reaction was that I could exteemally surpass multiply that or if one would talk up their speed boat and maybe the top speed it could reach; I will explain to you how to build a boat that will jet dry a lake and that is why I wish that I could get accross with some aspects. I half to stop this writing now and again it was not meant to insult anyone ; but someone said that I should visited a psycologist " however it is writen" where I may not know off hand with the will to actually give attention and brainstorm apon numerous ways to write it and end up with the likely right one; but I do know the difference between psychologist and a psychiatrist.
edit on 24-9-2011 by MichelJCardin because: (no reason given)
I constaintally think up things that sometimes have humourous sides to them but I do am mostly on serious notes when coming to proving theories and labelled laws of physics that were as such be wannabe masters of all aspects while only were but knowledged indivividuals assuming roles that they were certainly not fit to assume. That esentially was the initial reason for my concentrating apon finding loops where no others had yet thus far seen in transfers of forces and when I first called my brother that is close to me but far living and explained of one while we laughed as he said to me that it was about time that I would do such a task and not at all because I had in any way been trying to create free energy but essentially that he wondered or his first reaction was that is I had to had worked on tings such as any that none other could; meant nothing in terms of possibilities of anything. For example ; could you succeed in climbing up within our skies like you would a ladder? I didn't give any thought to this yet but will and let's see if I can tell you how you could do it . For me it is not let's see; it is that I will tell you how and even the best way to do it; I hope that I can LOL; will get back to you as I am tired of writing. And if I don't sell Good Night
edit on 24-9-2011 by MichelJCardin because: (no reason given)
Funny how I had just a smallest doubt that I could think of an idea where this could be done but there is at least one way and that is where if you visite the fact that if you climb fast enough steps that if you take your pressure and weight on each one of them to establish the next one atop the other for you to again repeat this action; you can then climb upwards through our earth's air ; but as it is thining ; that is another story; but I did figure a way and way worried there a bit ; but not really.
edit on 24-9-2011 by MichelJCardin because: (no reason given)



posted on Sep, 24 2011 @ 02:51 AM
link   
reply to post by MichelJCardin
 


I'll clarify a bit what I meant; birds have been doing this for a long time now; if you climb with your legs upwards into the air and every time that you push down on a step; it rises that last one overtop of it where you again step onto that one and if this whole rig is very light and large and when going upwards part cuts through air and dthe steped one is flat and floats atop of air;p then it is the plausible ; the same kinof way a snowmachine srives accrooss a lake.Or even for that matter it is similar to that of if you were in water and had platforms under your feet and these were to let water through when you raise them and when you pushed down on them ; they would seal where you then would push yourself up ; much like climbing stairs.
edit on 24-9-2011 by MichelJCardin because: (no reason given)



posted on Sep, 24 2011 @ 10:20 AM
link   
reply to post by MichelJCardin
 


Hey I apologize on behalf of anyone who was ever rude to you on this site. And I have the authority to do so on their behalf because they know not what they do. It bugs the ever-livin heck outta me when rudeness comes unwarranted. But just know that for ever 10 rude people, who are loud and make sure their opinion is known, there is one person like me who enjoys your threads very much because they are always about something new that I never thought of before, but those people like me don't always feel it necessary to make our humble opinions known. If somebody is confused about what you are saying, that's not surprising, but if they cannot behave in a polite, civil manner, then simply ignore them. Just do not reply. Don't waste valuable energy on them. And if they persist, simply make your position known, say this: "I will not waste valuable time/energy (timergy) on anyone who cannot manage to be civil and polite." However you must also remember to hold yourself to the same level of expectations.

I have a tip that may be of great use to you when attempting to explain your ideas to other people. First, learn to upload pictures. Then, draw as many pictures, diagrams, and graphs as you need in order to help explain your ideas. Take a picture of each of these with a digital device. Upload said photos and include them in your thread... You could do this and redo all your threads with pics. I would LOVE to see that!




top topics



 
1

log in

join