Need help with 2.4 GHz wireless "spy" cameras....please

page: 3
0
<< 1  2   >>

log in

join

posted on Sep, 8 2011 @ 05:52 AM
link   
reply to post by dainoyfb
 


the other cam has this on it...

203 TX

03.01.16


( on the circuit board itself...)

thanks again

seeya




posted on May, 9 2012 @ 12:08 AM
link   
Hi I hope its not poor form to jump onto another persons thread but I have a small problem. I to want to put one of these into a small Tricopter not a heli. The problem is I cant find the photos i took of the board before I removed the wires. Some of these pictures helped me guess but could you confirm where the power to the board goes. Is the video in yellow or white? I assume of the four in one strip in the excelent photos Black is earth, Red is power to camera, White is audio into tx, Yellow is video into tx. but as I say where is power and earth in.

Thanks and I hope jumping in is ok.



posted on May, 9 2012 @ 06:03 PM
link   
Most cams that i have used are IP Addressed

You would log into it with your computer and Browser
to For Example............192.168.0.1
then it will have default user name and password

For example

Admin
Admin

the make and model should be enough to provide this information from the Internet.



posted on May, 9 2012 @ 06:04 PM
link   
To log into them from remotely, you could use port forwarding!

Let me know if i am on the right track ?

Your thread is unclear to me, what you are trying to achieve!



posted on May, 16 2012 @ 03:46 AM
link   
I use a spy cam myself. I'm often gone from my house for a month or two at a time traveling...so I leave a spycam running in the background, sending pictures of my home to a remote FTP site. That way any time anyone walks into my home while I am gone, I have a record of their intrusion. It helps the police to capture the invader, and at the least verifies with my insurance company what happened in my absense.




inspection camera
car endoscope
car inspection camera
usb endoscope
wireless inspection camera
usb inspection camera



posted on Jun, 7 2014 @ 12:11 PM
link   
Dear friends

Here is the solution in the board KT-2.4G-50mW HamY has 3 empty holes and at the border a solder liner.
Linked one hole and the line means a channel (from ch1 to ch3), empty ch4.

I have tested it today in my camera.


O O O
|
-------------- this means CH1 frequency



O O O
..|
-------------- this means CH2 frequency



O O O
......|
-------------- this means CH3 frequency



O O O

-------------- this means CH4 frequency

Hoppe this help

best regards

cpalha
edit on 7-6-2014 by cpalha because: (no reason given)
edit on 7-6-2014 by cpalha because: (no reason given)



posted on Nov, 22 2014 @ 06:11 PM
link   
a reply to: cpalha

thanx cpalha

missed this reply sorry...

but appreciate your input





new topics

top topics



 
0
<< 1  2   >>

log in

join