???, page 1
Pages:
ATS Members have flagged this thread 0 times


reply posted on 11-12-2003 @ 12:57 PM by soothsayer
It all depends on the way you are using it. If you treat the board and its contacts with respect, everything is fine. Treat it with ill intent, and expect the same in return.

People who say the board is evil have seen too many movies. IT IS A TOOL.

I have made several different types of boards, each one designed for a specific type of entity or spirit. Even the most "evil" board I created (lightning struck oak, with the Necronomican's Names of Calling inscribed along its perimeter) was a tool; it allowed me to contact some rather... unusual beings, but nothing evil or wrong happened.

And remember, the board has a fail-safe: you. The spirits can only talk if you permit them to. They manipulate your body, your energies, to move the pointer; that is why you have to maintain contact with it. If the spirits could do it themselves, they would. If something "evil" comes on, you can mentally push them out. If it lingers, then let go of the pointer, it's that simple.

AN interesting experiment to try is place some kind of picture under the board; if you place a tarot card, you will contact the entity of that card. Place a one dollar bill underneath, and expect something unusual (money IS the root of all evil). Whatever is placed under, you will reach.

Likewise, placing a quartz crystal atop of the pointer will amplify the signals coming in, making them stronger, quicker, more focused.

I say YES to the board. IT IS A TOOL. If you have any questions, please feel free to contact me.


reply posted on 11-12-2003 @ 12:57 PM by Gazrok
Just keep one thing in mind...

This usually starts out great... You get a lot of answers to questions, and the cooperating spirit, or spirits seem very helpful and pleased.

Unfortunately, eventually they will turn. Whether this is inherent in their nature, or they are replaced by an impersonating entity, who knows...but the fact is...it happens.

As long as you can recognize when this "shift" occurs, fine, you can gain some valuable insight into the way things really are (then stop using it for a bit). However, this shift is usually very subtle. I'd recommend automatic writing over the Ouija..simply because there will be a point when the writing and word styles are different, and it's easier to detect the shift. This isn't the case with a Ouija board...

Once you start to use it frequently, the "doorway" so to speak, is opened by your conscious will. Only an experienced occultist can "close" it with will easily. However, with disuse of the board, the doorway will eventually seal back up (so you can simply wait a little bit (amount of time I'd give is a couple months) before trying it again, or you'll get the same nasty talking). However, while open, the board serves as a physical anchor to this reality. This is another reason auto writing is superior to Ouija...there is no anchor (except your will and desire to talk), and thus the doorway, is a more temporary one.

You can believe me, or not...makes no difference. What is, is what is. Just don't say I didn't warn you. It can be rewarding, but know when to get out. Also, you could get a nasty right from the start...though it's rare.

EDIT: As soothsayer says, it is a tool...the board is not "evil" itself, just may lead to contact those who are...though rarely initially... Another sidenote, the crystal suggestion does seem to have merit I've heard... Sometimes, a board can serve as an anchor to a specific entity...especially if designed to do just that during it's construction...(you'll find this with homemade boards). How the board is made though, is less important than what the maker's intentions and mood at the time... This is why mass-produced ones are rather benign, and it's more hit or miss what you contact....

[Edited on 11-12-2003 by Gazrok]


reply posted on 11-12-2003 @ 07:10 PM by soothsayer
GAZROK- I agree with the homemade boards versus the store bought ones; just as a repeat, I've made sveral for various functions. Store ones are good, though you might have to use the technique of using an image placed underneath it.

A couple types I have made...

1. Created a regular board/copy of store bought. I etched into each corner a symbol of an element, and "infused" that element (fire was burned, water was saturated, air had an airpocket inside, and earth little pinpricks smoothed with sand). I'd say the types of entities I reached were shamanistic/natural type spirits.

2. My "Necro" board. Made a box, roughly three feet by 1 1/2 feet by 6 inches. Painted it with oil based black, silver lettering. No numbers, no yes/no, no sun/moon. On the top surface, along the top were the first set of letters, on the bottom, the second set. In the center, still in silver, the design from the paperback Necronomican. Along the edges, I placed the symbols of the 50 names of calling. For a pointer, I just used a large rubbing crystal, with a black-ink circle on its flat side. This board recieved very strong spirits... harsh in movements. Usually when I use a board, I can "hear" what is said before it is spelled out, but with this one, I got... fog? Static? I couldn't understand it.


TheBandit795- Astral projection really isn't safer than using a board. With a board, you can "turn off", while with projection, you have crossed over into their realm of existance. But, then again, I suppose it's all up to what you are doing, or what your state of mind/intent is when doing those things.

It has been my experience that entities cannot lie when you are on a board, because you do feel the answers. However, they can manipulate the wordings so they can hide the truth. Just like the movie "WishMaster", you have to be very specific with how you state something, unless you know the thing you are communicating with.

I've created a small guide for myself, with the names and behaviors of the entities I regularly keep in contact with, to help me sort out the information. Some change the questions to suit their needs, others will answer out right before the question is finished being asked. After a while, you'll learn what to look for, and how to handle it.

*As a finishing remark...*

There was this one store bought board I had that I always had trouble with. I kept getting this spirit that would interrupt or push aside whatever I was talking to... the pointer would constantly go to "Z". After a while, it pissed me off, so I peeled off the Z from the board. Problem solved? No...

After a few more uses, my "Z" returned. How?

The pointer turned sideways and would go on the "N".

I thought it was funny, logged "Z" into my guide. Got rid of the board, though.


reply posted on 12-12-2003 @ 08:22 AM by darklanser
I have an old one as well (1950's I think). It's not the Parker Bros reproduction. The original planchette was missing so I made one with my friends. There were some strange things that came in through the board. Like soothsayer said earlier, It's a tool. You don't get freaked out when you get a wrong number phone call. It's basically the same thing. You get what you put into it. You charge it with negative energy you'll get negative results.

I had two people at a party once who used the Ouija board to find out my SS#. They did not know me. I was trying to prove they were goofing and asked them something I thought they would never spell out on the Ouija. When they pointed out the 6th consecutive number of my Social Security # I freaked out. Very spooky. I believe in them.

[Edited on 12-12-2003 by darklanser]



reply posted on 13-12-2003 @ 02:21 PM by soothsayer
Saving time... someone replied to me in regards to this question, so I'll just post it.

I've always found in these matters that your subconscious self knows what to do. Just like all the do-it-yourself books out there, you know what is right and wrong for your own needs/styles. So how would YOU make a board?

Like with my examples, I used oak for the "evil" one (I don't like oak trees... even though they are good with the Native American Indians... they are diturbing). For the shamanistic board, I used a good sized piece of drift wood.

I wouldn't think the materials would really matter, it all depends on what kind of energy you put into the creation process. Hell, I've made a board out of a cardboard box that worked just as well as any other kind!

I guess the biggest need is to have a smooth surface... you can do this in many ways, from a good paint, to the spray-on plastic clear-coat. Have to make sure the pointer has a smooth bottom (duh).

I am planning on making a board with steel ball-bearings, painting certian balls for the lettering. The only problem with this board is keeping the bearings inside the framework... might have to recess individual balls into pits...

But anyway... the energy you put into the board is more important than the things you make the board out of. You can even make a board on your computer, and have the mouse as the pointer; this is effective in that there is already a connecting energy!

Experiment!
Pages:     ^^TOP^^



Big Name Neuroscientist Announces Telepathy as Proven Fact!
  Posted 4 days ago with 144 member flags
For the Skeptics that believe Healing is fake, heres PROOF
  Posted 19 days ago with 15 member flags
I NEED YOUR EARS for my ghost box session
  Posted 12 days ago with 14 member flags
Clown sightings/attempted abductions in the midwest
  Posted 10 days ago with 14 member flags
*Experiment* Reading Your Emotions & Body Language
  Posted 19 days ago with 10 member flags
Strange (Scary) Experience I had.
  Posted 6 days ago with 10 member flags
Pareidolia.... Funny :)
  Posted 5 days ago with 9 member flags
My encounter with Mother Mary
  Posted 17 days ago with 7 member flags