It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

Magnet Fishing - I went back, check what I found.

page: 2
11
<< 1   >>

log in

join
share:

posted on Jul, 29 2017 @ 03:38 PM
link   

originally posted by: iWontGiveUP

originally posted by: Trueman

originally posted by: Reverbs

originally posted by: carewemust
a reply to: Trueman

Must be either very old or very unique. I can't find anything like it doing a photo search


its a sawed off daisy bb gun.
very deadly haha..

no really ive never seen one look like that either.


I thought that too. Wonder why someone would saw it.


The opposite of sawed off actually

It appears that the barrel was cut or snapped

The stock is full


Could be rusted out to where the end came off.

Unless it was really worked on, these bb guns had to use the length of the barrel to hold the bb's....so if it was done on purpose it would had to have had the caps welded back on after the chop job.




posted on Jul, 29 2017 @ 03:39 PM
link   

originally posted by: Trueman

originally posted by: Vasa Croe
a reply to: Vasa Croe

Sorry...meant if old it would be on left hand side of stock....


It's ok. I checked both sides and nothing on the stock.


Could also be worn down from years in the pond. It appears to be a red Ryder from the pics and comparisons.



posted on Jul, 29 2017 @ 03:40 PM
link   

originally posted by: iWontGiveUP

originally posted by: Trueman

originally posted by: Reverbs

originally posted by: carewemust
a reply to: Trueman

Must be either very old or very unique. I can't find anything like it doing a photo search


its a sawed off daisy bb gun.
very deadly haha..

no really ive never seen one look like that either.



I thought that too. Wonder why someone would saw it.


The opposite of sawed off actually

It appears that the barrel was cut or snapped

The stock is full


That's right. The stock is complete.



posted on Jul, 29 2017 @ 03:48 PM
link   

originally posted by: iWontGiveUP

originally posted by: Trueman

originally posted by: Reverbs

originally posted by: carewemust
a reply to: Trueman

Must be either very old or very unique. I can't find anything like it doing a photo search


its a sawed off daisy bb gun.
very deadly haha..

no really ive never seen one look like that either.

I thought that too. Wonder why someone would saw it.


The opposite of sawed off actually

It appears that the barrel was cut or snapped

The stock is full

Just made these 2 pics to confirm...




edit on 29-7-2017 by Trueman because: (no reason given)



posted on Jul, 29 2017 @ 03:58 PM
link   
a reply to: Trueman

Still an amazing find and thanks for showing us

Think I might have found a new hobby 👍



posted on Jul, 29 2017 @ 04:03 PM
link   

originally posted by: iWontGiveUP
a reply to: Trueman

Still an amazing find and thanks for showing us

Think I might have found a new hobby 👍


Thanks and good luck with your new hobby. You'll love it.

I'll see if I get more info from member's posts before I start cleaning this baby. I don't want to affect the value if it is old.



posted on Jul, 29 2017 @ 05:44 PM
link   
The Red Ryder BB gun appears to have a plastic cocking lever.
If it is plastic, the airgun is post 1980's vintage.



posted on Jul, 29 2017 @ 06:37 PM
link   
Here's a link to the company that made it. Same logo.

Daisy BB guns

It looks like a truncated Buck model 105.

Buck model 105
edit on 29-7-2017 by NowanKenubi because: (no reason given)


A new one costs 30.00$
edit on 29-7-2017 by NowanKenubi because: (no reason given)



posted on Jul, 29 2017 @ 06:39 PM
link   
Looks like an early 60's model to me. They were short. It had a screw-in magazine/barrel that had a knurled end on it. You had to remove it to load in about 20 or so BB's in a spring feeder, then re-insert the assembly in the end of the barrel and tighten it down.

Insert looked like this:



posted on Jul, 29 2017 @ 07:19 PM
link   
What intrigues me more is why they cut the gun barrel, you can see there is no front aiming.



posted on Jul, 30 2017 @ 07:35 AM
link   
Nice find! The Daisy Museum is located just up the road from me in Rogers Arkansas. You might give them a call as they could probably give you more info on it.
My hubby bought me a new Daisy a few months ago.Have been wanting one for years. Had several as a kid. Was heartbreaking to pull it out of the box and see "made in China" stamped on it. They are building new facilities though. Moving production back to here.



posted on Jul, 30 2017 @ 08:20 AM
link   
Looks like a Red Rider.
Careful you don't shoot your eye out.



posted on Jul, 30 2017 @ 08:20 AM
link   

originally posted by: sassymcsnickerson
Nice find! The Daisy Museum is located just up the road from me in Rogers Arkansas. You might give them a call as they could probably give you more info on it.
My hubby bought me a new Daisy a few months ago.Have been wanting one for years. Had several as a kid. Was heartbreaking to pull it out of the box and see "made in China" stamped on it. They are building new facilities though. Moving production back to here.



All over good news in that post, starting with the chance to contact a Daisy museum.

So great to know they are moving back to US.




posted on Jul, 30 2017 @ 08:23 AM
link   

originally posted by: skunkape23
Looks like a Red Rider.
Careful you don't shoot your eye out.

I don't think it will shoot again. Restoring it might be expensive.

I think I'm going back to the same spot today.



posted on Jul, 30 2017 @ 08:33 AM
link   
A sawn off Sluggy..



posted on Jul, 30 2017 @ 09:48 AM
link   
Youll shoot your eye out kid.
😉 S&F
edit on 30/7/2017 by Brian4real because: (no reason given)



posted on Jul, 31 2017 @ 06:08 AM
link   

originally posted by: NowanKenubi
Here's a link to the company that made it. Same logo.

Daisy BB guns

It looks like a truncated Buck model 105.

Buck model 105

A new one costs 30.00$


There it is. I couldn't find a picture of it. I knew the one in the OP was the same one I had as a kid but I couldn't find the model. Thanks.

Brings back memories! My parents bought me mine around 87 or 88 or so. The only thing is I don't remember that buck on the stock but it might have been there and I just don't remember it. I remember taking real good care of it, I oiled it down every day.



new topics

top topics



 
11
<< 1   >>

log in

join