It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

Trusting and Doubting 9/11, a neverending story. Additional T&B-evidence

page: 6
30
<< 3  4  5   >>

log in

join
share:

posted on Jul, 29 2014 @ 02:54 PM
link   
a reply to: hgfbob



sorry but the act of collapse does NOT explain the collapse.


So why doesn't lord Gage the first lay out how the towers were brought down?
All I've heard him say is 'it can't be this or It can't be that".

Has anyone ever heard him say it was thermite? Or cutting charges?
Has he ever explained how explosives survived the impacts?



posted on Jul, 29 2014 @ 03:36 PM
link   
a reply to: samkent




So why doesn't lord Gage the first lay out how the towers were brought down?
All I've heard him say is 'it can't be this or It can't be that".


to tell ya the truth....that is why I never fully trusted him...he does not talk or explain like an architect would.

and I don't even mention him either...there is no need to.

personally I think he's a buffoon to further cloud the issue...."oh yea, I'm an architect but I have NO idea why I think as I do".....lol....give me a break.

he supposedly studied physics and knows for a FACT that mass accelerating equal to g. can do no work.

you start from the facts and work backwards.....105 vertical feet of accelerating mass equal to g. occurring globally and unified means a clear path for 105 vertical feet.....no if's, and's or but's.



posted on Jul, 29 2014 @ 06:25 PM
link   

originally posted by: waypastvne

originally posted by: LaBTop


I found out that the steel floor plate decks at that side of that tower at that floor were not laid along, but instead were laid perpendicular to the exterior columns.
Which meant that the trusses under those floor plate decks could never have sagged and pulled those decks down, to be visible in that photo in the NIST report.



You looked at the wrong building. The photo was from the south tower. The trusses were running perpendicular to the pulled in wall on both buildings.

media.portland.indymedia.org...


At least and last, an intelligent opponent. Let's look at it my way.
If you look at my second picture in my above post :
files.abovetopsecret.com...


you can see in there the north face of the South tower around my red text "South Tower", and you can observe then the perpendicular to that face laid out floor plates in the wide middle section of that north face of the South tower.

And that is what I hinted at.



The observable hanging objects in your above linked to photo, run from the left side of the picture (from column 255) to the right side (to column 239), and there are in total, 21 columns from the 4 columns further, far left column 259, towards that column 239.
From those 21 columns, the numbers 12 to 21 are ALSO showing those hanging objects, and those column numbers were situated in front of perpendicular laid out floor plates.
You can check that lay-out, in my above already posted 6 photo's.
I counted these columns, in my 4th photo. In there you can see them as long dark-red vertical bands at max zoom.


waypastvne : You looked at the wrong building. The photo was from the south tower. The trusses were running perpendicular to the pulled in wall on both buildings.


Exactly what I already said, only you did not understand what my main point really was.
Read my text above, and under photo number 5 again, to understand what my main point was (hint : first line under that photo 5).

My second point which I explained a bit further, was that a huge conglomerate of welded together floor plate decks, filled with lightweight concrete that was extra reinforced by mats of rebar steel, are clearly not sagging in that NIST photo, and I offered the most logical explanation for that pulling inwards of those walls, both just before collapse started : cutter charges that sliced those core columns, where the whole floor surface was bolded and welded on via steel seats, and then those columns sank a few meters down, all the while pulling those perpendicular laid-out floors also downwards under a small angle, and thus they pulled, in reaction on that force, their exterior columns' seats down and inwards, until the first electrostatic thermobaric bomb was ignited, and then the rest of them.
Dustifying all concrete and pressing its now concrete-dust against the exterior walls as a loose layer, before these walls also gave way under the relatively slowly build up pressure from the e-TB explosion (a sign of a TB, in contrast to HE's) and were expelled out- and downwards, while loosing all that accumulated dust again on the way down. Exactly as we saw.

By the way, your posting of that NIST report picture made me re-think all my arguments, and now it is clear to me, that I can add another one.

Those concrete floors at that north face side of the South tower in your above picture were not sagging together with their firmly welded-on underlaying double-paired trusses, otherwise we would have seen also in those same row of broken windows at floor 80, the base of those raging flames of those raging fires on the 81st floor.
There is clearly no raging fire just above those sagging objects at that 80st floor at the moment of that photographed fire.
Which means that we definitely see no sagging trusses, but most probably, sagging aluminum ceiling rims.



posted on Jul, 30 2014 @ 01:06 AM
link   
It seems, I have to explain logically, or simply solve some severe misunderstandings about cause and effect of some of the most outstanding events during 9/11.
What we saw during the Twin Towers collapses and what really stood out and amazed us, among other things, were :

1. The massive explosive ring-shaped dust clouds bulging outwards and also up and away, from the floors they were originating from. As if huge detonations originated from inside those floor spaces. Or even deeper inside, from the core column spaces. And repetitions of detonations were set off at every second lower floor in a sequence that was close to a gravitational collapse behavior. Just as the 9/11-Planners intended it.

2. The steel exterior column-assemblies which were 'smoking' or were trailing dust as they fell. Some of them were laterally thrown out for distances as far as 300 feet.
Huge exterior surfaces, as big as 10 floors high and wide, were launched outwards.

3. The dust & debris cloud squibs, that spit out from windows under the collapse clouds fronts, with measured velocities from 60 to 70 mph.

And also all additional amazing things the Internet researchers found out later, in the years after 9/11/2001, from what emerged from, f.ex. the extensive research, undertaken by :

LDEO (seismic), USGS (dust), FEMA (first investigation), The 9/11 Commission (second), NIST (third), and all the individual research by numerous Internet researchers :

[A.] The iron micro-spheres in the dust found by Dr Jones & Dr Harrit.

[B.] The sulferized oxidation at high heat of some recovered steel found by FEMA, making it look like sliced Swiss cheese.

[C.] The correlation found by Jeff Prager between nuclear atomic radiation decay end products, in near perfect lockstep with each other. Normally only found after a nuclear atomic explosion, or in a nuclear fission reactor. Both involving Uranium-238.
And depleted Uranium (dU) as one of the end (or start-) products.

[D.] The seismic anomalies, as found by LaBTop for WTC 7, and Dr Graeme McQueen and Dr Rousseau for WTC 1 and 2.
Hinting strongly at the nefarious use of some kinds of mixtures of known and still unknown top-secret explosives, seconds before, and during all three collapses of WTC S-2, WTC N-1 and WTC 7.
Only the postponed, sudden discovery of chemical or physical traces of these kinds of explosives would make it an undeniable fact.
Be it traces from, for example, RDX, thermobarics or nuclear explosive sources.

[E.] The Pentagon anomalies with the North of CITGO gas station its flight-path witnesses, and the Flight 93 anomalies.
I better not expand on them in this thread. I wrote lots of it in other thread posts.

--more--



posted on Jul, 30 2014 @ 01:08 AM
link   
Regarding :

[1.] Those massive explosive ring-shaped dust clouds can be perfectly viewed in the already posted videos of the North and South tower collapses, posted by David Chandler, and listen then to his additional comments. (See my later posted REFERENCES)
He also attends the viewer on the dust & debris spitting out at speeds of 60 to 70 mph. That were the cutter charges exploding several floors lower than the massive explosive ring-shaped dust clouds, which pre-cut the inner core steel columns, about 30 meters away from the windows those squibs were spitting out from. When those cloud rings reached the floor above those column cuts, the whole inner core columns packet broke off from their still intact, lower parts, when the next e-TB was ignited, and the whole global collapse proceeded further down, in its 2-floor by 2-floor sequence.
Two floors because then, the e-TB on the second floor blew up the above and below concrete in those floor decks, into a fine dust. And crumbled the thin steel decks the concrete was laid on.
Then the explosion front with all the dust in front of it, reached the exterior panels and columns, and sheared the seats of the floor trusses off from those exterior plates, and then expelled them outwards with too high speeds to be caused by a real gravitational collapse effect. Exactly what we see happening in all those collapse videos.

[2.] Imagine an e-TB exploding in a WTC-floorspace. The enormous explosion front speeds of >30,000 m/sec in a circle of around 30 meters around the initial detonation, will instantly crumble all cement and concrete in the floors to fine dust.
That dust will be pressed against the exterior columns, before these get sheared off from the trusses under those not more existing concrete floors. Then these exterior surfaces are launched outward and fall downward, while loosing all that compressed dust on the way down.

[3.] Squibs were caused by (probably depleted Uranium lined) inner core columns cutter charges. See my reasoning already written up in above points 1 & 2.

--more--
edit on 30/7/14 by LaBTop because: (no reason given)



posted on Jul, 30 2014 @ 01:14 AM
link   
Regarding :
[A.] The extensive use of thermitic or thermatic explosives is not logical because of its relatively slow burn times, and it would be difficult to explain the other anomalies, combined with its use.
The intense white hot glow accompanying it, would stand out as a torch in all videos of the 3 tower-exteriors.
Usage in their deep interior regions, like the core regions, would not be visible in those videos, and there they could have been used to pre-cut the very thick, massive, 47 inner core steel columns and their cross beams. Their use on or near exterior columns would be totally illogical, since we saw no ultra-bright signs of them used there.
I also ask myself, if the use of e-TB's on every second floor would have grinder the thin steel decks eventually also into such fine dispersed iron spheres. The heat given off during an e-TB explosion is also very high, enough to melt those thin steel deck plates into such iron globules.

[B.] Sulferized oxidation is another expression for metal that burns up by reacting with oxygen from the atmosphere, be it fast (lots of external heat), or slow (rusting, with no observable heat).
Assisted by additions of sulfur salts or free sulfur.
It is not clear to me if FEMA has saved and locked away those "swiss cheese" steel parts, which they expected to originate from somewhere in the WTC 7 rubble heap.
WTC 7 steel was the first to get transported away.
Much more than what they already wrote on the subject can't be said anymore, without a new 9/11 investigation by real neutral researchers.
They strongly suggested to spend much more research on that phenomenon, but no one listened to it. Let it be to get a chance to follow up on their find.
My stance on the matter : This could have happened in the hot spot under WTC 7, in the period between September 13 and 23 when NASA heat-probed from a plane over Ground Zero and recorded these high temperatures. After 9/23 most WTC hot spots were tempered down to much lower temperatures.

[C.] I still have, and will always have, high praise for Jeff Prager's outstanding work on the USGS dust analysis reports, showing us indeed the very amazing abundance of non-radioactive decay end products and their correlations.
However, those could also be explained by usage of depleted Uranium (dU) as linings in cutter charges, instead of the usual copper linings.
Or by usage of dU as part of the chemical cloud in electrostatic thermobaric bombs. In such a case that electrostatic TB is used to cut those thick inner core columns. You can design discus-shaped electrostatic-TB clouds, which act as steel column cutters.

Most of the mini or micro neutron bombs on 9/11 advocates have come to their choice, because they think there is no comparable or usable other form of explosive, which can blow up those twin towers, exactly the way we saw it happen before our own eyes on 9/11.

They were not aware yet, of the immense explosive power of electrostatic-ThermoBaric bombs.
These were then, classified devices, mostly used by operatives of three letter agencies within hidden black operations.
Professor Cohen, the inventor of the atomic Neutron-bomb, named electrostatic-TB's in his description of them, a-Neutron bombs, so as to express his awe after seeing its enormous explosive power, without the radiation effects (neutrons) so well known from his own invention.
He called such an e-TB monster, a near-atomic explosive device.

And he was explicitly impressed by the near total absence of any traces of the detonation of an electrostatic TB, after the event.
All traces of e-TB's are gaseous, and dissipate quickly in the surrounding air and get spread by the wind.
Someone who knows that an e-TB is used, would go on a meticulous search for tiny traces of RDX, C4 or such high explosives, since they are used as tiny initiation devices for the various near instantaneous (micro-seconds) stages of the full explosion of a 3-stage e-TB which utilizes a small piezoelectric device for charging the gaseous cloud electrostically.
But their traces would be so minimal, they would be lost in the very fine dust deposit resulting from such e-TB explosions. Dust from concrete floors, walls, bricks, tiles and plaster, all found in common high rises.

Exploding e-TB's inside a structure will instantaneously grind any concrete structures, f.ex. 4 inch thick concrete on steel decks in a WTC tower, to ultra fine dust. And melt the thin steel decks where the concrete was poured on at construction time. Also melting the thin steel re-bars inside the concrete floors.


For an impressive demonstration, view the first video in this article of a Russian experiment with a really huge TB (equal to 44 tons of TNT), exploding far above a conglomerate of 4 stories high concrete buildings :
Article



--more--



posted on Jul, 30 2014 @ 01:16 AM
link   
Do not get distracted by Trusters who will say that an electrostatic TB is just a Fuel-Air bomb. As this article also said.

These e-TB's are definitely many, many steps higher in technical development, explosive power and complexity than F-A devices.

The complexity for example of that piezoelectric thermobaric device, that triggers the detonation of the small, last stage its HE charge (RDX f.ex.).
Its pressure trigger is depending on the pre-dial setting knob, which sets the ideal detonation cloud-pressure, which is the exact barometric pressure of the mixture of air and chemical cloud, expanding above that bottom-fixed little barometric-device, that delivers the best mixture-ratio, optioned for maximum explosive-energy, compared to the maximum attainable gaseous&chemicals-cloud extension.

Imagine an old fashioned aneroid wall-barometer, with that peculiar thin copper coil-in-a-box in the center, where a pointer indicates the present air pressure in millibar or mm Hg or inch Hg (Hg = quicksilver a.k.a. mercury) on a dial-plate (f.ex. 1013 Mb).
They modified that coil-in-a-box, so it is able to react on the much higher pressures. And added a triggering potentiometer instead of a pointer.

And then you have the complexity of the piezoelectric device, that was added to the barometric device. The same developing cloud-pressure induces a very-high voltage (but low amperage) electro-statical load in its bottom-attached piezoelectric crystal.
When the pressure reaches a nearly explosive value for the cloud, the container with the loaded crystal bursts open and launches its top cover, where a thin copper or niobium line is attached to, which is rolling off a spool. When that line is fully unrolled, a small pull is exerted on a micro-switch, that makes the connection between the fully loaded crystal and the line attached to the top cover. Then the whole expanding cloud is charged with a high electrostatic potential (>30,000 Volt) that has the strange still not fully comprehended effect of cooling that cloud, so it can not self-detonate.
Then, after reaching a few microseconds later, the pre-dialed pressure, the cloud is detonated with the tiny RDX charge, and explosive speeds of > 20,000 meter per second are reached by the explosive fronts. Because the cloud is now nearly comprised of nano particles, caused by the effect of the first stage explosive and the second stage electrostatic loading of that dispersed chemicals cloud. A statical load's negative or positive charge pushes every particle away from its surrounding particles, since they now all have the same charge, and same charges give same repulsive forces, thus spreading all particles, atoms and molecules in the cloud into a near-ideal gas cloud.
And that delivers such amazing high explosion-front speeds.
Which easily dustify every concrete structure in its cloud extension reach.

Imagine these e-TB monsters monsters hidden in the WTC cores.....
No detectable traces of them....
No radiation....
Enormous explosive forces, 1/5th of atomic strength....
RDX = 7,000-9,000 m/sec
e-TB = >20,000 m/sec
Nuclear = >100,000 m/sec

What you see when these e-TB monsters get exploded in a close to gravitational-speed downward direction, is EXACTLY what you see if you view all these videos of the twin tower collapses.
Just look again at the David Chandler videos of the North and South tower collapses I posted already. Where you see these rings of whitish concrete dust clouds spitting out of every second floor, at all four sides.
All these explosive dust cloud rings racing downwards at close to gravitational speeds.
Very simple to program into a radiographic signals computer program.

[D.] See my other posts in other threads.
ATS-Search for " LaBTop seismic "


[E.] See my other posts in other threads.
ATS-Search for " LaBTop Pentagon " or " LaBTop Flight 93 "

--more--



posted on Jul, 30 2014 @ 01:20 AM
link   
REFERENCES :

This is video 20 from a whole list of David Chandler videos.
Let the next videos play after this one, if you are a hard core 9/11 researcher, with a whole lot of time and deep interest at hand.
Cutter Charges in the North Tower of the World Trade Center.



David's videos account.

Wikipedia, thermobaric weapon , 67 References and 9 external links.
They keep avoiding the next generation of fuel-air bombs, the TB's :
en.wikipedia.org...

Title : Hydrocarbon warhead and method,
a US patent with drawings and with 18 other patent-citations links (read their titles.! ) :
www.google.com...

This is the extended FUEL/AIR BOMB design, that was the basis for the later electrostatic-THERMOBARIC BOMB developments :
Title : High explosive disseminator for a high explosive air bomb,
a US patent with a drawing and 7 other patent-citations links (read their titles.! ) :
www.google.com...

And this is the single drawing from the above patent :
files.abovetopsecret.com...


Compare it to this misfired TB, found on a street in Chechnya, when the Russians were bombing that muslemic country with their TB's :
files.abovetopsecret.com...


CONCLUSION :

Let this emphatic message sink in for a while.
Then realize what kind of society we could have, where these events-effects will not happen anymore.....



You now are able to feel the tears and endless sorrow from all the relatives from those who died and are dieing in these endless wars.
And realize which countries are the champions of sustaining them.
It's a very short list......


--End--
edit on 30/7/14 by LaBTop because: Changed dying to dieing.

edit on 30/7/14 by LaBTop because: (no reason given)



posted on Jul, 30 2014 @ 01:31 AM
link   
a reply to: LaBTop




a whole lot of time and deep interest at hand.




You really are dedicated...

I have a deep interest, but not so much time


Anyway, I'll try to check in on these...



posted on Jul, 30 2014 @ 03:28 AM
link   
Waypastvne, that NIST report photo you posted :



is from the north face of the South tower. The second plane impacted the opposite side, the south face. At an angle, at the east side, and nearly missing that tower.
Which resulted in the heavier parts of the right wing and the fuselage, and a part of the left wing, slicing through the office space on several floors on the east side of that tower, and ending heaped-up against its northeast corner, as you see in your photo.

That angled impact resulted in cartwheeling landing gear struts, jet motor parts and the more sturdier parts of the longitudinal beams plus parts of the cut vertical wing beams, slicing through several floors heights and shoveling office materials in front of them. Ending up in a heap at that northeast corner.
The somewhat smaller pieces shot out from that north face its east side.

That's most probably why we see those hanging ceilings rims, through those broken, now open windows on the 80st floor. Those ceilings were sliced loose by all those shooting through, plane and building parts.
I think those windows were shattered by building parts and plane parts shooting through their 80st floor windows glass. As we can see in the various videos of that second plane impact.
As long glowing or burning streaks, in a downward trajectory to the ground.



posted on Jul, 30 2014 @ 03:25 PM
link   
This is the original Russian video describing the thermobaric bomb they dropped on a 4 stories high concrete project.
Part of it was obliterated to fine concrete dust, and part was crushed with heaps of steel rods of re-bar sticking out of crunched concrete columns and beams.
They describe the explosive part of that TB as constructed by compressing nanotechnology produced products.
And also mention the near atomic bomb explosive speeds of the explosion fronts. You can see with your own eyes how fast that was, when you see the ripple in the air after the main explosion, it expands literally in the wink of the eye.

Title : Vacuum Bomb (The daddy of all bombs) :
www.youtube.com...


And this next one was the one I was searching for already such a long time, the English translation of the above Russian-spoken texts :
Title : The worlds largest NON-Nuclear Explosion EVER :


Imagine such monsters getting detonated inside a high rise its core area, such as from the Twin Towers on 9/11/2001.

Pay attention to the relatively very low sound of these types of TB's.
And an electrostatic cooled thermobaric explosive is always accompanied by its peculiar "crackling" noise, just before the main detonation.
That comes from the high voltage charging of the chemicals & hydrocarbon fuel cloud.

That effect is also described by two victims/survivors of the Oklahoma City bombing of the Murrah building who were inside, and a car dealer in a underground parking, who reported all electronics of his parked cars as having been fried, which he found out after the two explosions he felt.

edit on 30/7/14 by LaBTop because: Added more first text lines.



posted on Jul, 30 2014 @ 03:29 PM
link   
Signalfire, did Jeff Prager take in account the hailstorm of neutron radiation at detonation of any kind of mini or micro neutron bombs as he supposed?

Because if used in the first collapse sequence, from the South Tower, why do we not find any reports of hard gamma radiation victims that were still descending the North Tower stairwells, and pouring out of the North Tower's lobby. Coming at last out during the whole period of time after the South Tower was already collapsed. Until the North Tower also collapsed.
All these descending survivors should have been fried on their way down, by that hard gamma radiation.



posted on Jul, 30 2014 @ 04:02 PM
link   
I remember someone telling me, that fly ash was used in copious amounts in the light-weight cement that was poured as concrete on those floor deck plates, 4 inch thick.

And one abundant constituent of that fly ash, was lots of iron micro-spheres.

Could that have been the explanation for the iron micro-spheres that Dr Jones and Dr Harrit found in their WTC dust samples ?

Or was it the extreme high temperatures in the center of the TB cloud as described by the Russian commentator in the above Russian video of that TB explosion? Melting the relatively thin floor plate decks, where the concrete was poured on. And perhaps also melting parts of the thin steel re-enforcement bars in that concrete, all that steel melted partially into such iron micro-spheres.
Those temperatures are only reached in the center of the exploding TB-cloud.
edit on 30/7/14 by LaBTop because: Added last text.



posted on Jul, 31 2014 @ 12:50 PM
link   
For all the still doubting readers who want to know more about
SCIENTIFIC Thermobaric research, after reading all this, your doubt will either be gone, or substantially smaller :

REFERENCES :

-- First read this very well written short explanation by John Pike of globalsecurity.org of the working and effects of a thermobaric bomb, weapon or warhead :
Year? Thermobaric Explosive

Thermobaric materials can provide significantly higher total energy output than conventional high explosives. The majority of the additional energy is available as low pressure impulse and heat.

And that's why you saw big chunks of exterior wall panels getting ejected from their seats in both WTC Twin Tower collapses.
The pressure was low enough to not shatter them into a myriad of pieces, but high enough to dislodge them. And the heat and pressure inside the center of a detonating TB cloud is at peak-value, thus vaporizing the concrete to dust, and partly melting the floor plates and steel rebars.

-- 2003 Aspects of thermobaric weaponry.
Very good pictures and drawings.

-- 1981 Effects of gamma radiation from a nuclear detonation :
www.google.com...
For Signalfire and Jeff Prager. And others.

An apparatus for simulating, in conjunction with a source of ionizing radiation, intense pulsed electromagnetic fields and time varying air conductivity caused by the gamma radiation associated with a nuclear detonation


-- 1987 Nuclear-sized explosions without radiation :
www.google.com...

-- 1995 Fundamental and Applied Studies of Fuel-Air Detonation.
Some pictures of FAE detonations as research objects.

-- 2000 A 'Crushing' Victory: Fuel-Air Explosives and Grozny 2000:
fmso.leavenworth.army.mil...
Marine Corps Gazette. Good description how TB's work and their effects in Chechnya.

The Russians use fuel-air and thermobaric interchangeably, though there may be a technical distinction in the scientific community.


-- 2002 Advanced thermobaric explosive compositions :
www.google.com...

Another combined approach to further improve the metal combustion efficiency is to use a more reactive metal as part of, or as the entire metal fuel component. New reactive metal materials such as nano-sized aluminum to increase the reactivity, titanium and boron alloy to increase the thermal output, and magnesium/aluminum alloy to lower the ignition temperature are among the most promising approaches to increase the metal combustion efficiency. More powerful explosives such as CL-20 that are capable of raising the detonation pressure and temperature are also extremely beneficial.

There exists a need in the art for new explosive formulations with new reactive metal and metal composites to have 50–100% higher blast energy than those by the baseline composition such as Tritonal or PBX N109. Further, the new formulations coupled with new warhead designs will have the potential to form one of the most powerful thermobaric warheads, when compared to the weapon systems that currently exist.

What about nano-sized depleted Uranium?
As a more reactive metal.
Thus resulting in all these anomalies found by Jeff Prager in the 9/11 USGS dust-reports.

-- 1986 High explosive disseminator for a high explosive air bomb
www.google.com...
Already posted with the image. But belongs here too.

-- Compatibility Of Thermobaric Mixtures Based On Isopropyl Nitrate And Metal Powders :
www.vti.mod.gov.rs...

-- Verifying Performance of Thermobaric Materials for Small to Medium Caliber Rocket Warheads :
www.dtic.mil...

-- 1980 Mixture of boron and metal which reacts exothermically with boron (describes also patent development over time, very well) :
www.google.com...

9. A composite explosive comprised of conventional explosive material and a mixture of metals which form an intermetallic compound upon detonation of the conventional explosive material, the mixture of metals comprising boron and at least one other metal selected from the group consisting of lithium, titanium, hafnium, zirconium, tantalum, uranium and mixtures thereof.

(Depleted Uranium is a form of uranium, and thus can be used in cutter charge linings, as described in this patent under :
23. A method of forming a mass of hot or molten particles in an environment, comprising: etc.
F.ex. : U (s) +4 B (s) = UB 4 (s) where s means solid).

Furthermore, the blast from the conventional explosive material propels or spreads the hot and/or molten particles into the environment in the area surrounding the explosion.

(That's how all the cars under the WTC Towers could have been ignited).

-- 1965 Cyclotol and thermite explosive composition :
www.google.com...
( Thermite can be combined into an explosive mixture ).

-- 1997 High density tungsten-loaded castable explosive :
www.google.com...
(Tungsten is another very heavy metal lining material, just as dU, both have a much higher penetrating potential then the known copper linings of conventional cutter charges).

-- 2000 Titanium, boron, oxidizer of polytetrafluoroethylene (PTFE), binder of carboxy-terminated butadiene-acrylonitrile copolymer (CTBN) to improve electrostatic discharge sensitivity (ESD), safe to handle, ignites readily flame temperature:
www.google.com...

-- 2000 ESD sensitivity in titanium/boron compositions :
www.google.com...

-- 2000 First reactive material of titanium, second reactive material of boron, oxidizer of polytetrafluoroethylene (PTFE) :
www.google.com...

-- april 2001 Energy dense explosives :
www.google.com...

-- 2007 Multimodal explosive :
www.google.com...

-- 2009 Thermite torch formulation including combined oxidizers :
www.google.com...

-- 1990 Water reactive method with delayed explosion :
www.google.com...

In addition, other metals that are reactive with water at elevated temperatures may be added to the reactive mixture, including aluminum, lithium, copper, zinc, magnesium, beryllium, sodium, potassium, calcium, rubidium, yttrium, uranium and cesium.

There were huge water tanks at various mechanical floors in the 3 WTC towers, of which water we saw no outstanding traces in the expelled clouds, be it perhaps whitish steam?

A reactive mixture comprising 68.88 weight percent titanium powder and 31.12 weight percent boron powder, designated as TB100, was used in each of the following examples. The particle size for these powders was less than 44 microns for titanium and less than 3 microns for boron.

A higher than expected Titanium and Boron presence was found in the USGS samples after 9/11.



posted on Aug, 1 2014 @ 06:24 AM
link   
When you are reading the work of Jeff Prager about his thesis that mini or micro fission bombs were used on 9/11, you should also read the work of Ed Ward, MD regarding the same subject :

The US Government's Usage of Atomic Bombs - Domestic - WTC
By Ed Ward, MD :
www.thepriceofliberty.org...



posted on Aug, 1 2014 @ 06:43 AM
link   
For comparison reasons, to be able to interpret Jeff Prager's fission decay products research-results, here are the USGS reports from shortly after 9/11 :

Chemical compositions of the WTC dusts and girder coating material, including the Chemistry Table 1 :
speclab.cr.usgs.gov...

Chemistry Table 1. This table summarizes data for major elements and all trace elements analyzed in the WTC dust and beam coating samples :
speclab.cr.usgs.gov...

Evaluation of World Trade Center dusts and girder coatings,
using a simulated precipitation leaching procedure,
including the Leach Table 1 :
speclab.cr.usgs.gov...

Leach Table 1. Table summarizing analytical results for solutions leached from WTC dust and beam coating samples.
speclab.cr.usgs.gov...

The Leach Table correlations between Barium, Strontium and Uranium is not as obvious or not at all obvious, when compared to the correlation values measured by Jeff Prager via the Chemistry Table.
I am curious what Jeff thinks about that.

He used solely the WTC dusts and girder coating material specs from USGS their Chemistry Table 1.
It needs to be repeated regarding these analytical results for solutions leached from WTC dust and beam coating samples. Values found in USGS their Leach Table 1.
Then we have the full -eventual- fission products lockstep "picture".


Arsenic, cobalt, cadmium, thorium, and uranium are present in relatively low concentrations in the leachate solutions (maximum concentrations of 3.3, 3.2, 1.6, 0.5, and 0.5 micro-grams per liter, µg/L, respectively). --snip-- barium (62 µg/L)(maximum concentrations listed in parentheses)


Are they relatively more abundant in the samples (Chemistry Table 1), or (and?) are they leached in proportionally quite low amounts from the samples (Leach Table 1).
Barium seems to readily get leached by rain and pumped-in wash water (firefighter pumpers) :


Results of the leach tests indicate that the dusts released from the WTC collapse, when exposed to rainwater or wash water, likely produce slightly alkaline to quite alkaline, calcium-sodium-potassium-sulfate-bicarbonate-carbonate solutions.
At least some heavy metals and metalloids may be readily leached from the dusts: aluminum, chromium, antimony, molybdenum, and barium are generally leached in the greatest amounts, but other metals such as zinc, copper, manganese, titanium, vanadium, lead and mercury are also leached in measurable quantities.


The question remains then, how much of all the lock-stepped -eventually fissioned- material was more, or less, leached from the original dry dust, before it, later on, got sampled by the USGS samplers.
Some of it is more, some is less, soluble in the resulting alkaline rain/wash water solution.
Wouldn't that distort the whole fission products correlation picture that Jeff Prager painted for us? Those original quantities of produced fission products are thus first leached-out from the original dry dust in the open spaces where USGS sampled them.
Especially Barium and in lesser quantities, Uranium.

Only the few indoor samples would show the real original fission products concentrations picture.


- - - For example, heavy metals, such as lead, may occur in forms that range from highly soluble to highly insoluble in water - - -

And other heavy metals such as Barium, Cesium, Thorium, Strontium, Uranium etc., salts.

Sulfur in all its salts forms was also found at quite higher than normal, quantities.
Note the sulfur induced oxidized (rusted) supposed WTC 7 steel, the "Swiss cheese" steel, found by FEMA, the first official agency to make an effort to start a serious investigation of 9/11.
That happens only at far elevated temperatures, as was measured by the NASA planes that took those IRIS IR-photographs from 13 to 23 September 2001, after which the temperatures were at normal values again on the (near) surface.

Deeper under, we have no reliable figures, but for 3 months total, red hot metal pieces were unearthed from lower, deep cellars.
As I wrote before, the oxygen starved "wood-branches carbonizing pit" effect could be responsible for such extended deep fires.

And is in my opinion really the reason.
Compressed wooden or wood-based office and workspace materials can be substituted for oxygen-starved slow burning tree branches, and will act in the same, slow burning manner, when covered with huge heaps of synthetic materials and concrete dust.
Fresh air (19-21 % oxygen) was naturally delivered via the PATH train tunnels, and slowly seeped through the debris heaps in the compressed basements.



posted on Aug, 4 2014 @ 03:59 AM
link   
If you want to REALLY understand 9/11, you have to not only read the 9/11 related Internet Forums, but also read Internet 9/11-books.

William Engdahl, Title : Full Spectrum Dominance.

I read his book (245 pages), because I found a link to it from member "elementalgrove" :
www.abovetopsecret.com...

This gifted writer/journalist explains in EXTENSIVE detail, how 9/11 could happen, for what reasons, and why the whole grab for resources (which they hope will lead to maximum global influence and ultimately to pure Power), still is an ongoing process. As witnessed by us all, all over the world.



That greed-race will never stop, until we as a human race understand that the only solution for peace for us all, is declaring all natural resources as belonging to "Mother Earth", and not to a single entity that got a firm hold on it, because :
-- it is situated in their country, or
-- they took possession of it by force or by covert means, or
-- they secretly mined it or extracted it under false pretensions (as if they took another, much cheaper commodity)

All these natural resources were formed very long ago, when there were no humans, no borders and no greed, yet.
Water is also a natural resource. Sunlight, oil, Geo-thermal heat, ore-deposits, gold, diamonds, etcetera, are too.

The U N's charter should be re-defined, the honest distribution of all natural resources under all nations and all its manufacturers, becoming its sole responsibility.

All standing armies should be dissolved, and small parts of them should from then on fall under the jurisdiction of a UN lead global police-force. And housed in UN barracks.
All heavy weaponry will be forbidden to produce or possess, only small hand held arms are allowed for self defense.
This new UN should be directed by Noble price laureates.
Every country delivers one of their most honored scientists to the new UN council. Every country has one vote.
LOBBYING is all over the world explicitly forbidden, under harsh punishment.

Think-tanks should come up with new production goals for all the now becoming defunct, weaponry producers :
-- switch from military to civil products (planes, ships, transport
-- every aspect of a new "Race into Space" should be explored
-- every aspect of an enormous expansion of medical resources, inventions and research.
-- regulation of big pharmacy into small but effective pharmacy, into real cures, and not symptoms suppression. Much more and better medical equipment.
-- wind-, solar-, Geo-thermal, fission-, fusion- and cold-fusion (LENR, LANR)-energy inventive thinking should be pushed to the limits. And energy research will become a main subject.
-- every possible effort should be concentrated on a full reform of educational institutions, matters and progress.
-- Universities will excel again in truly free research.
-- Conglomerates will be split up again into smaller but more effective producing plants. Where every worker will be proud again on the products made by all of them.
-- Transportation will be concentrated on. Towards a free transport system, globally.
-- And come up with new regulations that will be the new laws, ruling the existing, and new to form, energy companies.

Trillions of Dollars, Euros, Rubles, Yens, and Chinese valuta (renminbi, yuan) will become available when all Military funding, and Intelligence-gathering funding is halted, and redirected to peaceful goals.

All recent wars were fought because of resources, nothing else, it is their root cause. And mainly ENERGY based.

In light of this above, read this :
Title : Americans Have Spent Enough Money On A Broken Plane To Buy Every Homeless Person A Mansion :
www.abovetopsecret.com...

They can't stop the new discoveries anymore.
This will give you an estimated 80 % saving on your electricity and gas bill :
e-cataustralia.com...

Cold fusion now, all the guest speakers at MIT :
coldfusionnow.org...

Publicized on April 3, 2014
David Nagel, NUCAT "Scientific and Practical Questions about Cold Fusion"
March 22, 2014 at the CF/LANR Colloquium at MIT :
www.youtube.com...




top topics



 
30
<< 3  4  5   >>

log in

join